Kevlar vs carbon fiber body armor

Carbon Fibre versus Kevlar Material Which one is the

  1. ated. That said, Kevlar offers a better abrasive strength than carbon fibre, which is why it commonly associated with bulletproof vests
  2. Request PDF | Kevlar and Carbon Composite Body Armor: Analysis and Testing | Kevlar materials make excellent body armor due to their fabric-like flexibility and ultra-high tensile strength. Carbon.
  3. (Kevlar is actually susceptible to being cut- a 'bulletproof' vest won't actually protect that well against, say, a broadhead arrow, which does slice to penetrate.) And so weaving and layering a bunch of kevlar fibers together makes something that essentially won't tear from blunt stretching force. Enough layers and a tight enough weave, and it.
  4. Kevlar fiber has a tensile strength comparable with that of carbon fiber, a modulus between those of glass and carbon fibers and lower density than both. Kevlar aramid is used for high-performance composite applications where lightweight, high strength and stiffness, damage resistance, and resistance to fatigue and stress rupture are important

Kevlar and Carbon Composite Body Armor: Analysis and

Polyethylene fibers have taken the place of Kevlar when it comes to modern armor. This is because of their significant reduction in weight and improved ballistic resistance. Specializing in tactical body armor, Body Armor Megastore has a plethora of protection products, including bullet proof inserts and ar500 steel plates Kevlar vs. Carbon Fiber for the Top Body Armor Material May 25, 2013 aptprepper Body Armor , Defense , Emergency Preparedness Guest post by Anthony McGrath Carbon fiber and Kevlar are materials that are used for making bulletproof vests protective inserts Dyneema® Vs. Kevlar®: Tensile Strength. You've probably heard about these fibers' strength-to-weight ratio before. Kevlar® states it is 5 times stronger than steel on an equal-weight basis and Dyneema® boasts an impressive 15 times stronger. Does that mean that Dyneema® will be a better material for producing safety gloves and sleeves Kevlar materials make excellent body armor due to their fabric-like flexibility and ultra-high tensile strength. Carbon composites are made up from many layers of carbon AS-4 material impregnated with epoxy. Fiber orientation is bidirectional, orientated at 0° and 90°

What’s the Difference Between Kevlar® and Carbon Fiber?

Kevlar is the trademark for aramid fibres, produced by US company DuPont. Its Kelvar KM2 technology is used in different armour applications, including the Interceptor body armour used by the US military. Kevlar has an equal weight basis to steel but is five times stronger, while being more flexible In short, no. Carbon fiber is frequently mixed up with another material by the named of Kevlar — which is actually bulletproof. Kevlar is made by DuPot, and it's what is usually used when creating bulletproof vests. Carbon fiber still offers a high amount of protection against various elements and objects, and it's something that you'll. Kevlar is an ideal body armor material, since its fibers are incredibly difficult to break (again, thanks to its tensile strength). The linked chain fibers of Kevlar absorb high-velocity impacts, instead of enabling a ballistic to penetrate the material. This feature makes Kevlar ideal for military and police applications, including body armor. Novel PBA-Grafted Carbon Nanotube Soft Body Armor Calisa Hymas, Steven Lacey, Kathleen Rohrbach, Samm Gillard, Chris Berkey Abstract: Kevlar fabric used in soft body armor provides protection from projectiles for service men and women, though often such a large amount of Kevlar layers is required that the flexibility of soft body armor is lost Kevlar is by far the most common fiber used to make body armor, but other materials are being developed. The most readily available alternative fiber is called Vectran, which is approximately twice as strong as Kevlar. Vectran is 5 to 10 times stronger than steel. Another rapidly emerging fiber is spider silk

Kevlar vs carbon fiber? : Armo

Gregg and I watched a video about carbon nanotube body armor. In the video, the company representative made some claims about Kevlar that made us both go.. Kevlar (para-aramid) is a heat-resistant and strong synthetic fiber, related to other aramids such as Nomex and Technora.Developed by Stephanie Kwolek at DuPont in 1965, the high-strength material was first used commercially in the early 1970s as a replacement for steel in racing tires. It is typically spun into ropes or fabric sheets that can be used as such, or as an ingredient in composite. Each of those items contains body armor in some fashion. High-density foam paired with carbon fiber or Kevlar composite abrasion panels is the most prominent body armor for motorcycle safety gear. They will provide impact and abrasion protection to all major and minor joints with the highest impact potential during an accident Chinese scientists have used conducting carbon nanotubes and impact-responsive polymers to create a smart Kevlar composite with enhanced ballistic and stab resistance. Body armour.

What's the Difference Between Kevlar® and Carbon Fiber

Back to Basics: Carbon Fiber vs Fiberglass vs Kevlar

Crossbow vs Kevlar Vest There has been an ongoing debate since a long time on whether a crossbow can penetrate a kevlar vest. Kevlar vests are bullet-proof Body Armor Cooling Vest, Tactical Ballistic Ventilation Air Flow - Draft Vest 3.5 (Medium) This liquid led to the invention of a synthetic fibre known as Kevlar. This fibre can be. Kevlar — Kevlar is a fiber material often used to create body armor for police and military use. It can sometimes be very stiff, allowing the monitoring speakers to produce the intended sound. graphite kevlar body armor with alumatatium . Reply. Apr 30, 2015 #19 I have a question what if you layered Kevlar with carbon fibers in making a bullet proof vest put the first layers all kevlar on the outside the start alternating kevlar carbon would that not possibility make the carbon fibers more resistant to weakness while increasing.

Body Armor Primer: Guns and Bullets vs

High-density foam paired with carbon fiber or Kevlar composite abrasion panels is the most prominent form of body armor available for motorcycle safety gear. They will provide impact and abrasion protection to all major and minor joints that have the highest potential of impact during an accident Aramid fibers, on the other hand, are more durable against exposure to certain chemicals and high temperatures. Aramid fibers can also be more flexible than the highest-performing UHMWPE products. The two types of fiber are sometimes used together to form ballistic armor with an optimal mix of weight, strength, and flexibility The body armor system includes a Testudo Gen 2 Plate Carrier, 2 AR500 Armor Level III 10″ x 12″ curved plates, 2 AR500 Armor Trauma Pads and other various options based on personal preference. The Testudo was developed from years of customer feedback, experience, and understanding Other Possible Armor Materials. Carbon fiber armor is a common question. If you do a Kevlar vs carbon fiber comparison you will find that strength and heat-resistance is better in carbon fiber. But you just don't see carbon fiber body armor or carbon fiber plates. The reason for this is that it tends to be too brittle and expensive Fiber-reinforced structures usually have the fibers running in specific directions to focus the reinforcement where it is needed and the epoxy keeps the fibers where they are needed. Although the main purpose of the epoxy matrix is to adhere to an..

Graphene body armor: Twice the stopping power of Kevlar

The key difference between Kevlar and carbon fibre is that the Kevlar essentially contains nitrogen atoms in its chemical structure whereas the carbon fibre does not contain nitrogen atoms and mainly contains carbon atoms in its chemical structure.. Kevlar and carbon fibre are two forms of synthetic fibres.Both these materials have a high strength. Therefore, they have many applications in. This carbon-fiber, kevlar, and titanium SUV is literally bulletproof. and a body that's made to practically be an armor. Available in a variety of styles and variants, the RM-X2 has the option of being equipped with B6 or B7 Ballistic Protection, thanks to its body that comprises materials like carbon-fiber, Kevlar, and titanium.

Is Aramid The Same As Kevlar? Is There A Difference

  1. In Northern Ireland, a company called Vikela Armour is prototyping a new type of body armor made from multiple materials, including Kevlar and carbon fiber. The lightweight material is engineered into a suit that covers the whole body, offering improved protection from IED-driven shrapnel
  2. Impact- Using Carbon fiber or Kevlar printed Hexagon 4in panels with simple 1in clips, an infinite array of geometry can be applied to fulfill a need for armor or protection. These panels can be made of more bendable but less ballistically firm with Carbon Fiber to better wrap a human shape or a full grade Kevlar which would be a lot more firm
  3. Gauntlet body armor. government-owned Kevlar, and thin, carbon inserts. and additional layers of carbon fiber inserts to meet Army requirements for protection against small-arms fire..
  4. Riding shoes, firefighting apparel, body armor and body pads also rely on Kevlar's unique qualities. A Kevlar vest (Photo Credits: Wikipedia) Recently, an outdoor apparel company called Vollebak made a hoodie out of Kevlar fibers
  5. al assault and being fatally injured at the scene. Research has consistently shown that wearing personal body armor reduces the chance of bodily injury or death caused by.
  6. Kevlar is high modulus para-aramid synthetic fiber. This fiber is one of the heaviest fibers of all time. In this paper there are some discussions about the Kevlar's properties, function and uses. Although in the past there were some research works had done and papers also been published, but this paper just simplifies the things as well as highlight some superb features of the Kevlar fiber
  7. Chinese scientists have used conducting carbon nanotubes and impact-responsive polymers to create a smart Kevlar composite with enhanced ballistic and stab resistance. Body armour made from this material could sense the force and location of impacts, and detect when it has been pierced. 1 Flexible, lightweight and durable, Kevlar has been a key component in personal armour for decades

  1. Composite fiber helmets are made from various fibers such as Kevlar, fiberglass, and carbon fiber, and categorized accordingly under the MATERIAL Refine Search menu. However, do note that helmets marketed as fiberglass, carbon fiber, etc., usually contain a mix of more than one of these fiber types
  2. g their duties. The kevlar armour is.
  3. Kevlar fibres or spectra fiber composites are used for designing personal body armour to avoid perforation. In this study, the ballistic impact behaviour of Kevlar/filled epoxy matrix is investigated

Differences Between Aramid and UHMWPE Body Armor

  1. The above ballistic material developed energy of 320 J. is promising for applications in personal body armor, The above-mentioned characteristic of carbon aircrafts, ships, and armored vehicles. nanotubes has been practically utilized by Block Table 2: Comparison of reduction of projectile velocity in Kevlar-based armors with and without CNTs.
  2. Carbon-fiber cutting Band Saw. Power Sander. Optional: 3.5 square feet of Carbon Fiber Prepreg (Resin already in fabric) Kevlar as body armor works because the kevlar fabric moves. Making it rigid prevents that movement and renders it useless in that regard. If you really wanted to use this for anything other than road rash protection, you.
  3. Kevlar is an organic fiber in the aromatic polyamide family. Kevlar has unique combination of high strength, high modulus, toughness and thermal stability. It was developed for demanding industrial and advanced-technology applications. Currently, many types of Kevlar are produced to meet a broad range of end uses

Flexible Kevlar Body Armour The Fortis Overt Ballistic Vest is a kevlar body armour which means that it is uniquely flexible when compared with metal or carbon fibre vests. It bends with the user which enables a greater range of motion and makes it easy to sit down, bend and do manual tasks. Fully Adjustable Shoulders and Wais Kevlar shears are scissors that are specifically designed for cutting Kevlar fabric materials - plastic, canvas, rope, nets, string, body armor, sails, and so much more! Vampire Tools offers Fiber Optic Kevlar Shears. These super durable and strong scissors are particularly designed for efficient cutting of Kevlar thread This reinforcement often comes in the form of high-density foam, hard plastic, and carbon fiber, often used in tandem with abrasion-resistant materials like Kevlar. There are two main categories of body armor. Replacement armor is any armored pad that is designed to fit inside armor pockets in motorcycle apparel. As the name suggests, these.

carbon fiber body armor - Apartment Preppe

Ropes made with Kevlar. Image via DuPont.com. Best known for its widespread use by militaries around the world, kevlar was invented as as a replacement for metal body armor in combat zones When, for example, a projectile hits the body armor it is caught by the tightly woven Kevlar fibers. Even if the projectile passes through the armor, a great deal of its energy will be absorbed by the Kevlar due to its extraordinary strength and flexibility, and it can be the difference between life and death. (DuPont, 2017 To maintain the softness and flexibility of the STG/Kevlar, it was necessary to study an optimal proportion of the carbon black in c-STG. Here, keeping the mass ratio of c-STG vs Kevlar at 0.6 (S4, S9-S12), the coupling relationship between carbon black and STG was studied. Primarily, the same stardard impactor testing was conducted at a. Para-aramid fibers such as Kevlar® and Twaron®, which are slightly different, have outstanding strength-to-weight properties, and have high tenacity which makes it difficult to cut or fray. High Rigidity Young's modulus (stiffness): 130-179 GPa compared to carbon Fiber 300 GPa and glass 81 GPa, low elongation to Break (does not stretch much)

DuPont™ KEVLAR® fiber: Ph. 561-588-1001: Kevlar 49. Cloths. Woven Cloths We also do not handle KEVLAR® for clothing or body armor. 5oz '1st Quality' Carbon / KEVLAR® Hybrid Fabric Available in 4 and 6 Tapes Unique fabric combining 3K-Carbon(Warp Direction) and Kevlar(Fill Direction) yarns into a plain weave fabric.. Body Armor 1. Body Armors • Kevlar is used extensively in body armor due to its high strength and light weight. • Inside the vest, Kevlar fabric is woven in an interlaced pattern. • When the bullet hits the armor, all the interlocked fibers pull on each other and increase the area of impact Nanocellulose is very similar to glass fiber or Kevlar — it's very stiff, lightweight, and it has eight times the tensile strength of steel. armor, and automotive/aerospace are no doubt. A set of dimensionless parameters for the optimization of textile-based body armor systems is described, which provide critical guidance to fiber developers, body armor system material integrators.

Aramid fibers are a class of heat-resistant and strong synthetic fibers.They are used in aerospace and military applications, for ballistic-rated body armor fabric and ballistic composites, in marine cordage, marine hull reinforcement, and as an asbestos substitute. The name is a portmanteau of the words aromatic and polyamide. F.T.C. gave the name in 1974 Prepared properly, CNCs are stronger and stiffer than Kevlar or carbon fibers, so that putting CNC into composite materials results in high strength, low weight products. In addition, the cost of CNCs is less than ten percent of the cost of Kevlar fiber or carbon fiber. These qualities have attracted the interest of the military for use in.

Just a quick re-cap, our cups are made with materials of the highest quality and strength like Dyneema®, Kevlar®, carbon-fiber, ultra high molecular weight polyethylene and aero-space epoxies, among others, and all work together to make the best cup in the market Body Armor and Ballistic Protection. Body armor is a type of protective clothing designed to deflect or absorb projectile attacks. While ballistic protection from firearm ammo is the primary use for body armor, the level of protection extends to absorbing stab impact from knives and from items being thrown in the direction of the wearer Kevlar and Carbon Fiber are two modern composite materials that are renowned for being both strong and light. Kevlar is in the same composite material family as carbon fiber, but the one problem that carbon fiber has when it comes to a phone case is its electrical conductivity feature Technora fiber is dimensionally stable at temperatures up to 200°C. Its thermal shrinkage above 200°C is estimated to be of the order of 1% at 300°C, 2% at 400°C, and 15% at 450°C. Chemical resistance. Technora fiber exhibits good chemical resistance to a number of common acids, alkalis, and solvents

Carbon fiber isn't used in armor, except perhaps as an underlying framework, because it is a soft, brittle material with poor transverse strength properties. What is carbon Nanotube Armor? Carbon Nanotubes(CNTs ) are very small, lightweight, and many times stronger than steel and Kevlar A bulletproof vest, also known as a ballistic vest or a bullet-resistant vest, is an item of body armor that helps absorb the impact and reduce or stop penetration to the torso from firearm-fired projectiles and fragmentation from explosions. The vest may come in a soft form, as worn by many police officers, prison guards, security guards and some private citizens

Dyneema® Vs. Kevlar®: The Ultimate Showdow

This Carbon Fiber Body Armor Can Save Your Life. This is a very interesting piece of cloth. This high-level body armor and slash proofing cloth can save you in a life-threatening situation. We love the slash proofing T-Shirt and the jacket The panels are made from high-tech carbon fibre composite. Carbon Fibres are stiff and have a high tensile strength but a low strength to weight ratio. This means that it is much lighter than Kevlar and Soft-Steel variants and as carbon fibre body armour is very rigid, it can absorb more kinetic force. Home Office KR1 SP1 Certificatio In a typical body armor design, a layer of Tegris LM can replace the layer of Kevlar- or polyethylene-fiber-reinforced polymer immediately behind the ceramic strike face to support the ceramic and help control back-face deformation. Brockman says testing shows that this configuration can improve multi-hit performance at a lower cost Several reasons: 1. Carbon nanotubes are hard to produce in bulk 2. Carbon nanotubes rarely exhibit their fantastic mechanical properties are macroscopic scales. You basically end up with graphite fibers. 3. Carbon nanotubes, like graphite fibers,..

The Carbon-Kevlar Hinge is made from co-molded carbon fiber prepreg wings with a gap between that forms the flex unit. The wings are either a woven carbon fiber/epoxy laminate or a hybrid glass and carbon fiber/epoxy laminate, while the flex unit is woven Kevlar impregnated with a flexible urethane sp2nano, a patented graphene carbon nanotube textile technology, has four times the energy dissipation over Kevlar and is lighter in weight, with applications in Body Armor protective clothing and protective devices; and in fabrics used in the advanced composites industries

Carbon Fiber. Carbon fiber is a structural composite that's rarely used as a ballistic material on account of its brittleness, relatively high density, and lack of ductility. It boasts an extremely high yield strength and flexural modulus, however, and its strength and stiffness make it attractive for certain niche applications in armor ballistic tests of glass/aramid/carbon fiber laminated comp osite plates at different reinforcing angles, in various numbers and thicknesses were carried out and the results analyzed Ask DuPont. DuPont Personal Protection Nuclear Environments Article Under proper storage conditions, there is no evidence to indicate that Tychem® fabrics lose their protective characteristics or physical properties in five years. This observation.. The light materials traditionally used for ballistic application are synthetic fabrics, made of high strength fibers such as aramid (Kevlar ® or Twaron ®) and ultra-high molecular weight polyethylene (Dyneema ® or Spectra ®) , . Other materials, such as carbon nanotubes and graphene , are also considered in light armor composites. Recently.

Fibre Armour: Stronger than Steel - Army Technolog

Kevlar is a type of aramid fiber. It is woven into textile materials and is extremely strong and lightweight, with resistance toward corrosion and heat. It is used in vast applications such as aerospace engineering (such as the body of the aircraft), body armor, bulletproof vests, car brakes, and boats. It is usually made into composites. for Kevlar fiber in industries like Aviation sector, War and general purpose Helmet making industries, War equipment industries use high velocity impact analysis for design purposes. This paper explains about ballistic impact on composites such as Carbon/Epoxy Composite, E-Glass Composite, SS304. 2.1 Carbon/Epoxy Composit The comparison between glass, carbon, Kevlar, and the most popular thermoset epoxy are tabulated in Table 3.2. Elastic modulus, strength and fatigue strength of Kevlar and carbon fibers are higher than glass fibers. Kevlar (aramid) and carbon fibers has a high strength-to-weight ratio compared to most commonly used E-glass fibers

Is Carbon Fiber Bulletproof? (4 Top Facts About The Stuff

The most protective soft armor vest you see today may weigh half as much as the equivalent unit three years ago, says John Dottore, who headed the DuPont Protection Solutions (Wilmington, Del., U.S.A.) Law Enforcement & Kevlar Body Armor segment for six years. Much of the progress has been recent, fueled by new fiber developments in the. Composite Armor reinforced fiberglass pools, according to Leisure Pools and Spas, are one of the strongest pools among composite and fiberglass pools. Kevlar Composite pool, also known as Kevlar Core fiberglass pool, is the pool constructed with a strategically integrated laminate that consists of a blend of Dupont™ Kevlar®, Carbon Fiber and Basalt Fiber, designed to significantly reinforce. bicycle tyres and racing sails to body armour because of its high tensile strength to weight ratio by this measure it is five times stronger than steel on an equal weight basis. [3] 1.3. Carbon Fibre Fabric Spring To form a composite carbon fibers are mixed with other materials. Plastic resin is combined with carbon fiber b

All About Kevlar® - Fiber Brokers International, LLC

BUILt FOR PERFORMANCE Performance is the driving force in every element of Safariland® armor. Safariland has built a reputation for innovation, and is credited for bringing to market the first commercially available personal soft body armor for law enforcement in the 1970's. With the acquisition of recognized legacy b From the comparison of aluminium with carbon fiber we know that material density has a direct impact on its weight. Carbon fiber composites have a density of 1.55 g/cm3 (epoxy resin 30%, carbon fiber 70%), that in the case of aluminum is 2.7g/cm 3 and 4.5 g/cm 3 for titanium or 7.9 g/cm 3 for steel The future of Bulletproof Vests more than likely lies in the development of Graphene, a newly discovered super-material that has a tensile strength to weight ratio higher than Kevlar or even Carbon Fiber. As of now though, and for the foreseeable future, graphene's utilization is restricted due to its inability to be produced in quantities. It's important to note that even Kevlar has its limits. For protection against rifle bullets (ordinary ones or armor-piercing ones), which travel much faster (850-900 m/s or 1900-2000 mph) with considerably higher kinetic energy, Kevlar isn't enough: you need body armor made from steel or ceramic plates (classified as type III and IV) From kevlar vests, to ceramic body armor, and hard steel armor, there are many different choices to fit your threat level requirements. Choosing the best bulletproof vest for your needs. Here at Bulletproof Zone, we want to make sure that every purchase you make with us is a wise investment in you and your family's security

Soft Body Armor HowStuffWork

Kevlar is an aromatic polyamide or aramid fiber introduced in early 1970s b y. DuPont. It was the first organic fiber with sufficient tensile strength and modulus to. be used in advanced. Write a review. $29.99. ★Made of 100% aramid fiber. It's a material often used for military materials, body armor (bulletproof vest), supercars, airplanes, spacecraft, etc. Do not interfere with your phone signals. ★Ultra-Thin and Light While the case is only 0.7mm thin and lightweight, our Karbon case is also very protective body armor made from 100% kevlar SafeGuard is the premium provider of high-quality, affordable bullet, stab and spikeproof vests. We are committed to developing and distributing a wide range of ballistic, tactical, concealable and lightweight protective carriers to promote the safety of law enforcement agents, military operatives, media.

Kevlar Body Armor - Terminator CCG - CategoryOneGames

Dispelling MISCONCEPTIONS about Kevlar body armor - YouTub

A Texas University is working on a product made from nanofibres, that can stretch 7 times longer than kevlar before breaking and even at the breaking point it is still stronger than kevlar. Kevlar can absorb upto 80joules of energy and this new pr.. Carbon Fiber Aramid Case for iPhone 12. ★Made of 100% aramid fiber. It's a material often used for military materials, body armor (bulletproof vest), supercars, airplanes, spacecraft, etc. ★Ultra-Thin and Light While the case is only 0.7mm thin and lightweight, our Karbon case is also very protective. Weight less than 14g Jun 6, 2011. Through the years, body armor materials have taken on many odd names: Kevlar, Twaron, Dyneema, and Spectra, among others. The newest material, still undergoing testing, is called Kryron. It's claimed to offer a protection-to-weight ratio higher than anything presently on the market, but it's the market itself that might keep.

Kevlar is well known as the material from which bullet-proof vests and body armour is made. But it can be used in many more applications, such as bicycle tyres, yacht sails, ropes, and brakepads. It can do this because, despite it being a fibre, it has an extremely high stength-to-weight ratio, often qiuoted as being 5 times stronger than an. Body armor always involve trade offs. Direct fire from large bore rifles firing rounds designed to compromise body armor will defeat almost any armor. It is simpler to make a better round than it is to make better armor. Body Armor is, and should always be, Plan B. Plan A is not to get shot in the first place Kevlar fibers are the most widely reinforcement for military and civil systems due to its excellent impact resistance and high strength-to-weight ratio. Kevlar fibers or spectra fiber composites are used for designing personal body armor to avoid human injury from aggressive action by knife, sharp, spike, broken glass, and needle Kevlar has different types of weaves, and the weave that makes a fabric-like material for vests is called Kevlar 29. Kevlar 29 may also be used in brake lines, or to replace asbestos. It is also is a major part of the composition of body armor. Kevlar has two other types, Black Kevlar, and Kevlar 49 energy absorption capability of the body armor plate without complete penetration. In phase-I, the effects of material stacking sequence and geometrical configuration on the ballistic behavior of hybrid and non-hybrid body armor plates were studied. Three different materials have been used, carbon fiber, Kevlar and date palm fiber

carbon fiber vs kevlar?Diy Kevlar Body Armor - Do It Your SelfKevlar vs

Kevlar is a well known high-strength polymer with a variety of important applications - think bullet-proof vests and car armor plating. However, Kevlar is not soluble in any common solvent and, having no melting point, decomposes above 400°C. As a result, Kevlar fibers must be produced by wet spinning from sulphuric acid solutions 5.75″ fiber optic kevlar cutter $ 29.83 $ 19.39 High quality scissors for cutting kevlar thread, string, security vests, body armor, plastic, fiber optic cabl Coolmax PRO® Ballistic Level 3A Vest Black. £295.00. Four-point Adjustable. Lightweight Covert Bullet Proof Vest. Delivered in 1-2 working days. Weight: Approx. 5.5lbs. Made from Kevlar. Protects against a range of high powered handguns. Ballistic Level: NIJ Level IIIA Composite Armour™ is a carefully woven, patented blend of three high performance fibers. Bullet proof vests, body armor, military vehicles, wind turbines and various aerospace, automotive and numerous other cutting edge applications all owe credit to the incredible strengths of these fibers. Strength and durability are intertwined Made of 100% aramid, a high-tech luxury material for body armor, aero space, supercars. Weightless feel. Weight less than 12g. One of the lightest case on the planet. Extremely Thin. A slim profile of 0.65mm only. Extraordinary scratch resistant, grippy but non-slippy coatin